Damping torque 10 +/- 2 Ncm Damping direction bidirectional Gear without Construction size Ø 25 mm Rotational speed max. 50 rpm Lifetime 50,000 cycles (1 cycle = 360° left-hand, 360° right-hand). Even after this time, the dampers still produce over approx. 80 % of their original damping moment. The service life may be significantly higher or lower, depending on the application. Operating temperature range 0 °C to 50 °C Pressure angle 20° Material Outer body, Shaft: plastic Mounting in any position Tooth Involute gearing (addendum modification coefficient: +0.375) P.C.D. 12 mm No. of teeth 12 Module 1 | Mounting informationNo axial or radial forces may be induced via the shaft. Safety informationDo not use rotary dampers as supports. Provide an external guide or support. On requestSpecial designs available on request. Toothed plastic racks (modules 0.5 to 1.0) are available for the rotary dampers with pinions. |