Safety Products
TYPESEnergy capacity Nm/cycleStroke mm
SCS63-100EU18,000100
SCS63-150EU27,000150
SCS63-200EU36,000200
SCS63-250EU45,000250
SCS63-300EU54,000300
SCS63-350EU63,000350
SCS63-400EU72,000400
SCS63-500EU90,000500
SCS63-600EU108,000600
SCS63-700EU126,000700
SCS63-800EU144,000800
SCS63-1000EU180,0001,000
SCS63-1200EU216,0001,200

SCS63-800EU

Low reaction forces with long strokes

High Rack Damper, Optimized Characteristic
Energy capacity 144,000 Nm/cycle
Stroke 800 mm

Slim with a long stroke: Safety shock absorbers from the SCS38 to SCS63 product family are also designed for emergency-stop applications. Strokes of up to 1,200 mm are possible with these maintenance-free and ready-to-install dampers. Low reaction forces result due to the large strokes.

The characteristic curve or damping characteristics of all safety shock absorbers from ACE are individually adjusted to the respective application, specific to the customer. The metering orifices for the respective applications are specially calculated and produced. These tailor-made machine elements are the ideal protection because they are less expensive than industrial shock absorbers and are effective with up to 1,000 possible full load emergency stops.
Learn More ...

CAD Drawings

Product-Downloads

SCS63-800EU
High Rack Damper, Optimized Characteristic

Dimensions

SCS63-800EU
Stroke800 mm
A max.1,865 mm
B1,045 mm
D1,000 mm
E max.843 mm

Technical data

Energy capacity 144,000 Nm/cycle

Reacting Force at max. capacity rating = 80 kN to 210 kN N

Return Force min. 1,500 N

Return Force max. 2,500 N

F and S
Side Load Angle max.
2.5 °

R
Side Load Angle max.
1.5 °

Impact velocity range 0.5 m/s to 4.6 m/s. Other speeds on request.

Operating temperature range -20 °C to +66 °C. Other temperatures on request.

Mounting in any position

Positive stop Integrated

Damping medium Automatic Transmission Fluid (ATF)

Filling pressure approx. 2 bar. Rod return by integrated nitogen accumulator.

Note

The shock absorber can be pushed through its stroke. In creep speed conditions the shock absorber provides minimal resistance and there is no braking effect.

On request

Special oils, special flanges, additional corrosion protection etc.
Integrated rod sensor for indicating the complete extension of the piston rod. Type normally closed or normally open, option PNP or NPN switch.

General information

Application Examples

SCS38-63 End-position damping in 2 axes
SCS38-63 End-position damping in 2 axes
The aim was to protect a driving simulation capsule on two of its eight axes. The demands placed on a potential emergency stopper were high because it was clear that its failure would lead to massive damage to the complete construction as well as to the capsule. Even the possibility of damage to the health of the test personnel could not be ruled out and was taken into consideration in a ...

Application Areas

  • shelf storage systems
  • heavy load applications
  • conveyor systems
  • conveyor systems
  • portal systems
  • test stations
Anyone who wants to reliably protect the end positions of rack operating equipment, conveyor and crane systems, heavy duty applications and test benches chooses these safety shock absorbers from ACE.
×

I have an Account

Secure Orders by encrypted transfer of your data.

I am a new Customer

Wenn Sie in unserem Shop ein Benutzerkonto einrichten, werden Sie schneller durch den Bestellvorgang geführt und genießen unseren individuellen Kundenservice.

  • Vereinfachter Bestellprozess
  • Sicheres Login
  • Individueller Kundenservice

Bitte beachten Sie, dass wir exklusiv an gewerbliche Kunden mit gültiger Umsatzsteuer-Identnummer liefern.