+44(0) 1942 727440SL-100-25-D-MP2
- Produced according to a patented formula
- Produced without use of propellant gas
- Homogeneous structure and reproducible damping rates
| Material | Mixed cellular polyether urethane |
|---|---|
| Standard colour | Green |
| Delivery form | Thickness: 12.5 mm and 25 mm. Rolls: 1.5 m wide, 5.0 m long. Strips: Up to the maximum width and length. Other dimensions (also thickness), colours, shapes and cut-out parts on request. |
| Impact velocity range | max. 5 m/s |
| Environment | Resistant against ozone and UV radiation (also see chemical resistancy) |
| Material | Mixed cellular polyether urethane |
| Standard density | 270 kg/m³, 500 kg/m³ and 800 kg/m³, according to DIN 53420 |
| Impact resilience | < 30 %, tolerance +/-10 %, according to DIN 53573 |
| Operating temperature range | -30 °C to +70 °C, short-term higher temperature potential up to 110 °C |
| Possibilities for cutting | Water jet cutting, stamping, splitting, sawing, drilling, etc. |
| Mounting style | Bonding (see adhesive recommendation page xx), clamps, screws, etc. |
| On request | Available with compact polyurethane wearing surface, shore hardness: 82 shore Sh A. |
| W3 max. | 11.5 (33.0) Nm/Cycle |
|---|---|
| A | 70.7 |
| B | 70.7 |
| C | 25 |
| Area | 5000 mm2 |
| Density | 500 kg/m3 |
| Return Time | ca. 4 (5) s |
| Base unit of measure | STK |
|---|---|
| Weight | 0.06 kg |
| Customs tariff number | 39211390 |
| Country of origin | AT |
Design
- Produced according to a patented formula
- Bonded for easy mounting
- Temperature range from -30°C to +70°C
- Wide-spread absorption of shock loads
- Effectiveness of elastic damping can be ascertained in advance
- Customer specific moulded shapes
- Reduced noise levels
While visco-elastic PUR damping is linked primarily to insulating or delaying vibration, ACE has developed this material even further to dampen impact shocks.
ACE thus creates new prospects and provides design engineers with a highly versatile product series.
ACE-SLAB in customer specific moulded shapes is bonded for easy mounting to offer an ideal solution for many damping requirements where shock loads have to be absorbed over large surfaces.
Function
- Very high inner damping, recoil elasticity < 30%, tolerance +/- 10%, as per DIN 53573 (shock damping sheets)
- Exactly defined static and dynamic product properties (vibration damping sheets)
ACE's two D and F series offer optimum solutions for the entire range of vibration damping and for effective reduction of resulting structure-borne noise.
The PUR material used in Series D is made to a patented formula and has been developed specially to absorb shock loads.
Its very high inner damping makes this product an alternative to hydraulic end position damping, if the mass does not have to be stopped in a precise position and the energy does not have to be absorbed 100%.
SLAB damping sheets in Series F are used in vibration insulation, e.g. in machine tools and textile machines, hydraulic units or presses and punches, and help to avoid stoppages in the production process and detrimental effects on product quality.
